Bakezori
Jikitotsu-koromo - long robe of japanese monks
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
For meditation and holding services in Buddhism, a special type of vestment is used - jikitotsu-koromo. This is a very wide cassock with large sleeves and folds, which can be easily wrapped almost entirely.
We created this cassock to create the image of a monk and a priest, but real practitioners of several major sects of Buddhism are happy to order cassocks from us as their vestments.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Dark waraji - ninja jute sandals
Dark dyed waraji is the best for ninja image, made out of strong jute and soft enough to step without any sound. It can be worn over tabi socks (or even jika-tabi boots) or over your bare feet. Just get used a bit to ties and your ninja's absolute footwear is got.
Black or dark waraji suits amazingly to our shinobi shozoku or any ninja costume you can get
- 1-2 weeks to make
- Natural jute
- Clean with brush or wash separately from any other materials
*Classically waraji are worn in a way that the heel is almost covered with the sole, while the toes are partly outside (though in cosplays a more contemporary variant is often used, when the sole protects fully the toes).
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Movie ninja gauntlets
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Using velcro and elastics to fit
- Wash in cold water (30dg) with black/colour detergent
Comfortable cool fabric bracers just as from Sho Kosugi movies - easy to put on, easy to wear. Perfect for cosplay, shows or hiding tattoos on arms. Uses velcro and elastic bands to fix on hands.
Do not hesitate to ask anything about this item. My experience is at your service.
Grey ninja suit
Typical ninja outfit from the martial arts movies, made out of sturdy cotton, gauntlets with elastic bands and deep hood.
- In stock.
- Ideal for person of height: 175 cm (5ft 9in)-185 cm (6ft 1in)
- Natural durable grey cotton with density 240g/m (8.5oz)
- In this set:
- shirt
- trousers with ties
- revenge ninja hood and balaclava mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do not hesitate to ask anything about this item. My experience is at your service.
Iga-bakama casual stylization
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Waist elastic, attached belt, knee and ankle elastic lacing, two side pockets disguised as traditional slits
- Wash in cold water (30dg) with black/colour detergent
Sport and casual upgrade of our igabakama stylization for fast putting on and easy wearing.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Shinobi shozoku - costume or spy-suit of ninja
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- uvagi (shirt)
- shitabaki (trousers)
- fukumen-zukin (mask and hood)
- haori (outer jacket)
- traditional tekko (gauntlets) with ties
- traditional kyahan (gaiters) with ties
- Wash in cold water (30dg) with black/colour detergent
- Hood guide - https://www.youtube.com/watch?v=AYHDKGIKVKU
More than 10 years we search for authentic ninja costume. Many tailors and companies sew them in different ways but none of their products are looking fine for me practical or just not stupid. So i decide to make my own vision of ninja costume - durable enough for training and beautiful as traditional japanese clothing.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Black hachigane - armored headband with covering
- 1-2 weeks to make
- Stainless steel thick plate 180*50*2mm hammer bent
- Hammer paint cover
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
This hachigane is the best representation of sample ninja armorings: it's simple yet sturdy. Black painting protects from irrelevant glares in the dark. Thick armore plate make turn even head into crushing weapon.
Do not hesitate to ask anything about this item. My experience is at your service.
Evil Ninja Domination costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- jacket with velcro sleeves and burlap stuffed shoulder pads
- trousers with ties
- revenge ninja hood and balaclava mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do you like to crush golf balls with your bare fingers? You'll love it with this costume from already classical movie "Ninja 3: Domination" costume! We upgraded it for years, making it as close to movie original prop as we could.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Hitai-ate - forehead protector with custom symbol
- Contact us to provide a symbol you want to be engraved
- 1-2 weeks to make
- Stainless steel plate 110*45*1mm
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
Hitai-ate is forehead armor plate used as symbol of status or a membership in a clan. This design from the times when hitai-ate was not real armor, but more like insignia. We use laser engraving to customize the hitai-ate.
Do not hesitate to ask anything about this item. My experience is at your service.
Hitai-ate - polished forehead protector
- 1-2 weeks to make
- Stainless mirror-polished steel plate 110*45*1mm
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
Hitai-ate is forehead armor plate used as symbol of status or a membership in a clan. This design from the times when hitai-ate was not real armor, but more like insignia. That's polished and may be seen from afar.
Do not hesitate to ask anything about this item. My experience is at your service.
Hitai-ate - forehead protector from the Edo epoch
- 1-2 weeks to make
- Stainless steel plate 110*45*1mm
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
Hitai-ate is forehead armor plate used as symbol of status or a membership in a clan. This design from the times when hitai-ate was not real armor, but more like insignia. Anyway we make it as durable as possible, using hard stainless steel.
Do not hesitate to ask anything about this item. My experience is at your service.
Iga-bakama cosplay stylization
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Double folds in front, one on the back for more traditional look
- Waist drawstring, attached belt, knee and ankle ties, two side pockets disguised as traditional slits
- Wash in cold water (30dg) with black/colour detergent
Igabakama stylization for the best fit for cosplay - includes pockets, but still look very historical. Moreover it's absolutely fit the training requirements, allowing to run, jump, do gymnastics or martial arts exercises.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
American Ninja 2 costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- jacket with front velcro and attached stuffed tabard
- trousers with ties
- balaclava mask and face piece fabric strap
- vintage velcro gauntlets
- belt
- Wash in cold water (30dg) with colour detergent
Our first detailed reconstruction of traditional Amercian NInja costume. Surprisingly comfortable!
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Kukuri-bakama stylization - short trousers
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Waist and knee drawstrings, attached belt
- Wash in cold water (30dg) with colour detergent
Kukuri-bakama once worn by pilrgims and monks now available for everyone - they amazingly comfortable to be worn on hot weather, during physical activities, yoga etc. Kukuri-bakama stylizaiton has both drawstring and attached belt, so it fixes twice.
Kukuri-bakama cool if you want to wear as is or to complete nice eastern image.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Iga-bakama basic stylization
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Waist drawstrings, attached belt, knee and ankle traditional ties
- Wash in cold water (30dg) with colour detergent
Our bestseller - trousers that combine traditional oriental elements (belt, ties under the knee and ankle, deep characteristic pleats) and modern ones (no side slits, waist drawstring).
Tried and tested by numerous martial arts trainings and even long-distance running.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Laced habaki gaiters
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Using lacing to fit on a leg
- Wash in cold water (30dg) with black/colour detergent
Laced kyahan (habaki) gaiters can turn almost any trousers into ninja ones, pressing lower part to the leg. Metal eyelet and lacing may it easy to wear.
Do not hesitate to ask anything about this item. My experience is at your service.
Miko shrine maiden set
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz) and less dense for juban
- Contains:
- outer hakue robe with wide kosode sleeves and red ribbons
- red trousers hakama in traditional fashion
- inner shirt juban
- Wash in cold water (30dg) with black/colour detergent
Miko - or shrine maidens - have wide popular image in anime, manga, movies and still be easy met in daily life in Japan. They work in shrines, keep it clean, helping priests and actively participatin in matsuri festivals. They have easily recognizable look because of bright red hakama trousers.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Sohei monk costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz) and less dense for juban
- Contains:
- monk outer robe motsuke-koromo
- short trousers kukuri-bakama stylization with drawstring and belt
- traditional tekko gauntlets with ties
- traditional kyahan gaiters with ties
- inner shirt juban
- jute rope to gird up
- Wash in cold water (30dg) with black/colour detergent
Sohei or battle monks were mighty warriors of Sengoku period in japanese history. Their image is pretty popular in folk culture, so even ninjas used their image as a disguise. Now you can try it on yourself! Actually their outfit is typical for pilgrims - special robe and comfortable short hakama trousers are the best for long walk. Just add some weapons and peaceful buddha servant turns into dangerous fighter.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.