Bakezori
Dark Multicam Yukata
Ready-to-dispatch men yukana in multicam camo patternIn stock.
- Ideal for person of height: 170 cm (5ft 7in)-180 cm (5ft 11in): length 148cm
- Blended fabric with Dark Multicam camouflage pattern
- Wash in cold water (30dg) with colour detergent
Do not hesitate to ask anything about this item. My experience is at your service.
Sohei-zukin - battle monk hood
- 1-2 weeks to make
- Natural cotton
- Wash in cold water (30dg) with white/colour detergent
Sohei zukin - hood, that is worn by sohei (battle buddhist monks) due Japanese medeival period. Great addition to historical look.
Do not hesitate to ask anything about this item. My experience is at your service.
Traditional habaki gaiters
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Using traditional ties
- Wash in cold water (30dg) with black/colour detergent
Kyahan are very important part of japanese traveler's costume. Kyahan protects legs from grass, sand, cold weather, even insects and other annoying problems on the road. Traditional kyahan use two ties to be wrapped around the shin and ankle, also it's good base for foot armor - suneate. Kyahan are amazing addition to your image. It can be worn under kimono, over the hakama to fix them or even instead of pants at all.
Do not hesitate to ask anything about this item. My experience is at your service.
Kukuri-bakama stylization - short trousers
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Waist and knee drawstrings, attached belt
- Wash in cold water (30dg) with colour detergent
Kukuri-bakama once worn by pilrgims and monks now available for everyone - they amazingly comfortable to be worn on hot weather, during physical activities, yoga etc. Kukuri-bakama stylizaiton has both drawstring and attached belt, so it fixes twice.
Kukuri-bakama cool if you want to wear as is or to complete nice eastern image.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Hayabusa hood
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Consists of two parts - hood and fukumen face mask
- Wash in cold water (30dg) with black/colour detergent
Hood and mask of the most famous ninja of video games - Ryu Hayabusa, who started his adventures in 80's. This is the first Hayabusa hood, that differs from the usual ninja one.
Do not hesitate to ask anything about this item. My experience is at your service.
American Ninja 2 costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- jacket with front velcro and attached stuffed tabard
- trousers with ties
- balaclava mask and face piece fabric strap
- vintage velcro gauntlets
- belt
- Wash in cold water (30dg) with colour detergent
Our first detailed reconstruction of traditional Amercian NInja costume. Surprisingly comfortable!
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Evil Ninja Domination costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- jacket with velcro sleeves and burlap stuffed shoulder pads
- trousers with ties
- revenge ninja hood and balaclava mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do you like to crush golf balls with your bare fingers? You'll love it with this costume from already classical movie "Ninja 3: Domination" costume! We upgraded it for years, making it as close to movie original prop as we could.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Koga-shozoku - ninja outfit with vest
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- uvagi (wide-sleeved shirt)
- zubon (trousers with ties)
- sleeveless haori (vest)
- fukumen-zukin (mask and hood)
- traditional tekko (gauntlets) with ties
- small obi belt
- Wash in cold water (30dg) with black/colour detergent
- Hood guide - https://www.youtube.com/watch?v=AYHDKGIKVKU
Basic and practical shinobi suit designed under impressions of movies and videogames. The codename "koga-shozoku", the most popular shozoku we ever made. May be worn in tens different ways.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Sleeveless gi top
- 1-2 weeks to make
- One slit in the back, no side slits
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
There is a lot of ninja appearing in movies, comics and cartoon - and many of them wear sleeveless shirts demonstrating arms and byceps. So why not to join their party? We use our sturdy fabric, so actually this gi top can be used for both for training or cosplay.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Motsuke-koromo - travel robe of japanese monks
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
Going on the road, Buddhist priests put on a special cassock, shorter so as not to interfere on mountain roads, but wide to hide the body from the scorching sun. It was motske-koromo that became the marching attire of military priests and combat monks "sohei", accompanying them in battles and allowing them to hide other elements of armor on breastplates.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Ninja Terminator costume
Ready-to-dispatch costume of Ninja Terminator. Cool both for training and cosplay. Or Halloween for sure.
- In stock.
- Ideal for person of height: 170 cm (5ft 7in)-180 cm (5ft 11in)
- Rip-stop blended fabric with Tiger Stripe camouflage pattern
- In this set:
- shirt
- trousers with ties
- enter the ninja hood and face triangle mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do not hesitate to ask anything about this item. My experience is at your service.
Jikitotsu-koromo - long robe of japanese monks
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
For meditation and holding services in Buddhism, a special type of vestment is used - jikitotsu-koromo. This is a very wide cassock with large sleeves and folds, which can be easily wrapped almost entirely.
We created this cassock to create the image of a monk and a priest, but real practitioners of several major sects of Buddhism are happy to order cassocks from us as their vestments.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Revenge Ninja hood - vintage movie mask
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- face mask (fukumen)
- hood with ties
- Wash in cold water (30dg) with black/colour detergent
Ninja hood with mask - one of the variants worn by shadow warriors from movies of 80's: Enter the Ninja, Ninja 3: Domination etc. Very easy to tie and wear. Amazing gift to any ninja-lover.
Do not hesitate to ask anything about this item. My experience is at your service.
Jinbaori — japanese surcoat, samurai vest
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
Jinbaori in general is just a haori for warriors - officers and genrals cover their armor with it. It can be the most simple fabric one and rich decorated with gold expensive. We use the basic model to add coolness to any japanese image, so you can pick color and any size you need.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Revenge of the Ninja costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- shirt
- trousers with ties
- revenge ninja hood and fabric triangle mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with black/colour detergent
Significant and bright American Ninja costume appearing in several sequels of famous franchise. Another solid best-seller of all ninja costumes, mostly thanks by nostalgic feelings and cool play of Sho Kosugi.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Hanzo hood
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Consists of two parts - hood and fukumen face mask
- Wash in cold water (30dg) with black/colour detergent
Hood designed to resemble the Hattori Hanzo head gear from the Kage no Gundan (Shadow Warriors).
Do not hesitate to ask anything about this item. My experience is at your service.
San-shikaku-hachigane - three-square-parts hachigane
- 1-2 weeks to make
- Stainless steel thick plates 50*50*2mm hammer bent
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
Hachigane made of three bent squares connected with traditional kusari chain. Hard and durable, can be easily fold and packed. The basic samurai head protection.
Do not hesitate to ask anything about this item. My experience is at your service.
Waraji - japanese traveler jute sandals
- 1-2 weeks to make
- Natural jute
- Clean with brush or wash separately from any other materials
Waraji are Japanese sandals with strings made from rope and used for long everyday wearing.
For centuries people in Japan wore these shoes in on-foot journeys, pilgrimages and military campaigns. Waraji are a traditional attribute for Japanese soldiers as well as for ninja spies and monks.
*Classically waraji are worn in a way that the heel is almost covered with the sole, while the toes are partly outside (though in cosplays a more contemporary variant is often used, when the sole protects fully the toes).
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.