Bakezori
Jinbaori — japanese surcoat, samurai vest
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
Jinbaori in general is just a haori for warriors - officers and genrals cover their armor with it. It can be the most simple fabric one and rich decorated with gold expensive. We use the basic model to add coolness to any japanese image, so you can pick color and any size you need.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Jikitotsu-koromo - long robe of japanese monks
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
For meditation and holding services in Buddhism, a special type of vestment is used - jikitotsu-koromo. This is a very wide cassock with large sleeves and folds, which can be easily wrapped almost entirely.
We created this cassock to create the image of a monk and a priest, but real practitioners of several major sects of Buddhism are happy to order cassocks from us as their vestments.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Haori - formal outer jacket
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
Haori usually worn over kimono as a formal dress - it can be used as official costume element. It should be quite helpful in completing image of policeman, samurai, presenter etc. It has wide sleeves, so they can be used as pockets, also it's possible to fix sleeves under armpits with special tasuki cord. We use haori as element in shinobi shozoku set.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Sohei-zukin - battle monk hood
- 1-2 weeks to make
- Natural cotton
- Wash in cold water (30dg) with white/colour detergent
Sohei zukin - hood, that is worn by sohei (battle buddhist monks) due Japanese medeival period. Great addition to historical look.
Do not hesitate to ask anything about this item. My experience is at your service.
Hitai-ate - forehead protector from the Edo epoch
- 1-2 weeks to make
- Stainless steel plate 110*45*1mm
- Leather padding
- Natural durable cotton with density 240g/m (8.5oz) for hachimaki
Hitai-ate is forehead armor plate used as symbol of status or a membership in a clan. This design from the times when hitai-ate was not real armor, but more like insignia. Anyway we make it as durable as possible, using hard stainless steel.
Do not hesitate to ask anything about this item. My experience is at your service.
Motsuke-koromo - travel robe of japanese monks
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Wash in cold water (30dg) with black/colour detergent
Going on the road, Buddhist priests put on a special cassock, shorter so as not to interfere on mountain roads, but wide to hide the body from the scorching sun. It was motske-koromo that became the marching attire of military priests and combat monks "sohei", accompanying them in battles and allowing them to hide other elements of armor on breastplates.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Iga-bakama basic stylization
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Waist drawstrings, attached belt, knee and ankle traditional ties
- Wash in cold water (30dg) with colour detergent
Our bestseller - trousers that combine traditional oriental elements (belt, ties under the knee and ankle, deep characteristic pleats) and modern ones (no side slits, waist drawstring).
Tried and tested by numerous martial arts trainings and even long-distance running.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Dark waraji - ninja jute sandals
Dark dyed waraji is the best for ninja image, made out of strong jute and soft enough to step without any sound. It can be worn over tabi socks (or even jika-tabi boots) or over your bare feet. Just get used a bit to ties and your ninja's absolute footwear is got.
Black or dark waraji suits amazingly to our shinobi shozoku or any ninja costume you can get
- 1-2 weeks to make
- Natural jute
- Clean with brush or wash separately from any other materials
*Classically waraji are worn in a way that the heel is almost covered with the sole, while the toes are partly outside (though in cosplays a more contemporary variant is often used, when the sole protects fully the toes).
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Sohei monk costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz) and less dense for juban
- Contains:
- monk outer robe motsuke-koromo
- short trousers kukuri-bakama stylization with drawstring and belt
- traditional tekko gauntlets with ties
- traditional kyahan gaiters with ties
- inner shirt juban
- jute rope to gird up
- Wash in cold water (30dg) with black/colour detergent
Sohei or battle monks were mighty warriors of Sengoku period in japanese history. Their image is pretty popular in folk culture, so even ninjas used their image as a disguise. Now you can try it on yourself! Actually their outfit is typical for pilgrims - special robe and comfortable short hakama trousers are the best for long walk. Just add some weapons and peaceful buddha servant turns into dangerous fighter.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Traditional habaki gaiters
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Using traditional ties
- Wash in cold water (30dg) with black/colour detergent
Kyahan are very important part of japanese traveler's costume. Kyahan protects legs from grass, sand, cold weather, even insects and other annoying problems on the road. Traditional kyahan use two ties to be wrapped around the shin and ankle, also it's good base for foot armor - suneate. Kyahan are amazing addition to your image. It can be worn under kimono, over the hakama to fix them or even instead of pants at all.
Do not hesitate to ask anything about this item. My experience is at your service.
Ninja Terminator costume
Ready-to-dispatch costume of Ninja Terminator. Cool both for training and cosplay. Or Halloween for sure.
- In stock.
- Ideal for person of height: 170 cm (5ft 7in)-180 cm (5ft 11in)
- Rip-stop blended fabric with Tiger Stripe camouflage pattern
- In this set:
- shirt
- trousers with ties
- enter the ninja hood and face triangle mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do not hesitate to ask anything about this item. My experience is at your service.
Revenge Ninja hood - vintage movie mask
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- face mask (fukumen)
- hood with ties
- Wash in cold water (30dg) with black/colour detergent
Ninja hood with mask - one of the variants worn by shadow warriors from movies of 80's: Enter the Ninja, Ninja 3: Domination etc. Very easy to tie and wear. Amazing gift to any ninja-lover.
Do not hesitate to ask anything about this item. My experience is at your service.
Hanzo hood
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Consists of two parts - hood and fukumen face mask
- Wash in cold water (30dg) with black/colour detergent
Hood designed to resemble the Hattori Hanzo head gear from the Kage no Gundan (Shadow Warriors).
Do not hesitate to ask anything about this item. My experience is at your service.
Revenge of the Ninja costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- shirt
- trousers with ties
- revenge ninja hood and fabric triangle mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with black/colour detergent
Significant and bright American Ninja costume appearing in several sequels of famous franchise. Another solid best-seller of all ninja costumes, mostly thanks by nostalgic feelings and cool play of Sho Kosugi.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Evil Ninja Domination costume
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- jacket with velcro sleeves and burlap stuffed shoulder pads
- trousers with ties
- revenge ninja hood and balaclava mask
- vintage velcro gauntlets
- small belt
- Wash in cold water (30dg) with colour detergent
Do you like to crush golf balls with your bare fingers? You'll love it with this costume from already classical movie "Ninja 3: Domination" costume! We upgraded it for years, making it as close to movie original prop as we could.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Hanzo-shozoku
- 2-4 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- In this set:
- sleeveless shirt (you can request to add sleeves for free)
- traditional iga-bakama
- hanzo hood with mask
- traditional tied gauntlets
- Wash in cold water (30dg) with black/colour detergent
Legendary shinobi Hanzo Hattory played by Sonny Chiba touched hearts of thousands of people waking interest in shinobi all over the world. Ours too, so we made this set trying to get as close as possible to this image of mighty hero from movies and comics.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.
Traditional tekko gauntlets
- 1-2 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Using traditional ties
- Wash in cold water (30dg) with black/colour detergent
Traditional kind of gauntlets, worn by pilgrims, samurai and other traveling people. These gauntlets cover arms and protect them from sun, cold wind, tree branches. Long ties just wind around arms and tuck under.
Do not hesitate to ask anything about this item. My experience is at your service.
Tattsuke-bakama (igabakama) - traditional ninja and samurai battle trousers
- 2-3 weeks to make
- Natural durable cotton with density 240g/m (8.5oz)
- Multiple folds in front, one on the back
- Double traditional hakama belts
- Knee and ankle ties, two side traditional slits
- Wash in cold water (30dg) with black/colour detergent
The most "ninja" pants you can imagine. Classic trousers that can be worn under samurai armour or as a part of samurai or shinobi look. Surely, you have to spend some time finding the right way to wear them, but at last you'll get the most comfortable trousers in the world.
Do not hesitate to ask anything about this item. My experience is at your service.
If you want to give some specific information about your measurements please do it in the comments to your order.